What are the position sending modes available on the mobile application?

This article tells you which position sending modes are available on the mobile application. Please note that this article is intended for iOS users. If you have any further questions about the Bike Tracker we invite you to click here. If your request concerns other products, we invite you to visit our Help Center.

You have the possibility to choose 4 modes (mode 0, 1, 2 and 3) to send position to the mobile application using the dedicated bar, you will find the details below.

Warning: under Sigfox mode 0 and mode 3 do not exist. These two modes are only available under LoRa.

Mode Name Description
 Mode 0 The tracker is regularly reported on our platform without giving precise information on its position. This mode allows a very long autonomy. You can request the tracker's position via the application at any time, especially in the event of loss or theft - it can take up to 4 hours to send the position. This mode is the most recommended for objects that you do not want to track on a daily basis
 Mode 1 The tracker is signalled on our platform every 10 minutes as soon as it is in motion. This mode allows you to trace accurately while saving battery power
 Mode 2 The tracker is signalled on our platform every 5 minutes as soon as it is in motion. This mode allows you to trace more intensively but is more battery-consuming
 Mode 3 The tracker is signalled on our platform up to once every 2 minutes as soon as it is in motion. This mode allows you to trace very intensively but is very battery intensive 

 

If you wish to dissociate the Bike Tracker from your user account, we invite you to read this article.

Was this article helpful?
0 out of 0 found this helpful

Submit a request